Varian confirms Concept

Selection of sheet variations over the election, to choose the criteria that exist largely to satisfy the existing criteria, but in the end to be chosen the most appropriate variant.


 The most appropriate option is a variant to-4 with the following considerations:
- Meets the criteria of beauty
- Fulfilling a sense of comfort, practical simple.
- The cost of making relatively inexpensive.
- Easy to assemble and disassemble.
Thus these four variants will be selected for further development.




  • READ MORE.......





  • for STEP BY STEP GUIDE solidwork simple tutorial please visit.........
    www.solidworksimpletutorial.blogspot.com

    ---or---

  • www.solidwork-simple-tutorial.com

  • Principle Solutions for subfunctions

    Having made ​​the overall structure and its function subfungsinya, we then look for the principles of a solution to meet these subfunctions. Methods to be used in finding a solution principle is the combination method, a method that combines all the existing solutions in the form of a matrix.
    The principle of the solution sought as much as possible, but the principles of the solution was analyzed again, where the principle of the less useful solutions can be eliminated or ignored in order in the next stage of the design concepts are not too many concepts that must be evaluated again.







  • READ MORE.......





  • for STEP BY STEP GUIDE autocad simple tutorial please visit.........
    www.autocadsimpletutorial.blogspot.com

    ---or---

  • www.autocad-simple-tutorial.com


  • Sub Structure Function

    Overall structure of the function contained in figure 3.1 is less clear, so it needs to be clarified again by decomposing into subfunctions.

     Function and Structure Function Working Section Table
    In this section we shall define the functions and structure, to consider first the main elements involved in the system work desk.

    The main elements of the workbench:

    A. Support leg:
    - Upper leg support
    - Lower leg support

    2. stopper bolt
    3. Cable channel
    4. Long beam
    5. Modesty panel

    6. Cover:
    - Upper cover
    - Frame cover

    7. Foot plug
    8. Upper pipe plug
    9. adjuster bolt
    10. Desk top.

  • READ MORE.......


  • for more details and updates about unigraphics simple tutorial please visit.........
    www.unigraphicsimpletutorial.blogspot.com

    Working Table III abstraction

    Abstraction III transforming quantitative data into qualitative data is important. A third of this abstraction, it can be concluded that the desired work table is:
    a. A work table that can be raised-down.
    b. proportional to size
    c. convenient to use
    d. Meet the criteria of beauty.
    e. Manufacturing cost is not expensive.


    3.2.3.3 Abstraction Table IV Work
    In the abstraction IV is a further step in formulating abstractions III into the more common form. IV is the result of abstraction that will be subject to desk-height scaled by the proportional size and comfortable to use and meets the criteria of beauty with an inexpensive manufacturing cost.

    Work Table V 3.2.3.4 Abstraction
    On Abstraction V is a step to neutralize the whole problem with the task of formulating a free solution.
    Abstract The results of Table V is working to meet the required standard by the industry.
    3.2.4 Structure Function






    The structure function is generally defined as the relationship between input and output of a system of techniques that will execute a particular task, while the overall function is the usefulness of a tool. Overall function is then decomposed into several sub-functions that have a lower difficulty level. So that the sub-function is a task that must be executed by the components that make up the tool. Concatenation of several sub function to run an entire task is referred to as the structure function.
    The purpose of establishing the structure function is to obtain a clear definition of the existing sub-systems that can be described separately.
    3.2.4.1 Overall Function
    This function is illustrated by a block diagram showing the relationship between inputs and outputs where the inputs and outputs in the form of a flow of energy, material and signal.




  • READ MORE.......



  • for STEP BY STEP GUIDE unigraphics simple tutorial please visit.........
    www.unigraphicsimpletutorial.blogspot.com

    ---or---

  • www.unigraphic-simple-tutorial.com

  • ABSTRACT: Work Desk

    All data related to the task, the purpose of solving, qualities that should be, completely and clearly Didefinisinikan a list will
    Once the list is complete will be made, so do I and II abstraction step by step to mendefinisakan basic packaging will list the results of abstraction that can be seen in the following section:

    Abstraction Tables I and II Job
    In the abstract I wish all on the list will be removed for a while.
    In the abstract II requirement that has no direct relationship to the principal functions and constraints can be ignored.
    Results of abstraction I and II can be seen in Table 3.2.






  • READ MORE.......





  • for STEP BY STEP GUIDE solidwork simple tutorial please visit.........
    www.solidworksimpletutorial.blogspot.com

    ---or---

  • www.solidwork-simple-tutorial.com

  • List of desired

    Before we reach the specs, we do not yet know the outlines of how the form of tables which is height adjustable work and what will be achieved in the presenceof the workbench.
    Therefore drafted a list of the will. List will be listed initially randomly arranged in a systematic and ultimately included in a format called specifications.
    The first phase collected ideas that you want, the situation is still not settled, the ideas are as follows:
    a. Convenient to use the table.
    b. Height adjustable desks.
    c. Easily assembled and disassembled.
    d. Saving space, the table does not take a lot of places.
    e. Complementary components are easily replaced, compact and lightweight.
    f. Manufacturing cost is not expensive.
    g. In many manufacturing jobs.
    h. Dependence on foreign technology to a minimum.
    i. Can be made ​​in bulk.
    j. Style and moments are used as efficiently as possible.
    k. In try not too complex.
    l. Operation is relatively easy.
    m. Can be operated by one person.
    n. Safe for users.
    o. Easy maintenance.
    p. Meet the criteria of beauty.
    q. Can be developed as needed.
    r. Easily moved, move it.
    s. Dibengkel medium can be made.
    t. If any damage can be repaired in place.
    u. Framework must be sturdy.
    v. Resistant to corrosion.
    w. Materials are available in the country.







  • READ MORE.......










  • for STEP BY STEP GUIDE solidwork simple tutorial please visit.........
    www.solidworksimpletutorial.blogspot.com

    ---or---





  • www.solidwork-simple-tutorial.com



  •  
    THESIS Copyright © 2009 Blogger Template Designed by Bie Blogger Template